Click on the image to check the artwork
Auto Collision Repair Bench
Dataliner SINL800 is a mobile and universal straightening bench for all vehicles.
It equipped to do several independent pulling.
With Dataliner 800, you can comfortably work thanks to a big backing off between the support and the vehicle.
With strongly and adjustable props we can have the best height to work.
A pulling down is elaborated with a block which is easily assembled on the bent. With this detachable block, you can automatically regulate the good position.
A double pulling can be make from a same base to several fixation points which have different heights
In a same point and adding an angular pulling to a front pulling, we can have an excellent control on the straightening work.
We often want to pre-unbendthe car before using the measure system. Here, for bananaimpact, the pulling is combined with a pressure jack which is between the attachment of the chassis.
In front of the car, there are 2 pulling. The measure can be simultaneously effected, so we can have a continuous control of the work.
With the pulling down(under the side sill), the spiral of the forward part is easily
Suppress.
With several extension piece, the pressure jack is easily extended and fixed on the roof. So when the pulling are very strong, we have always a jack in big capacity.
Technical parameters
Straightening bench
Bench only
Length: 4100mm
Width: 900mm
Lifting weight: 3000kg
Total weight: 1100kg (bench with all accessories)
Surface treatment: Durable paint, galvanized accessories.
Height above floor
On support: Approximately 520-700mm
Auto Collision Repair Bench (SINL800)